Schultz & Larsen T-Handle Wrench (Torx 20)

£11.50
20% VAT incl.


  • Model:SL-T20-WRENCH
Schultz & Larsen T-Handle Wrench (Torx 20)

For use with Schultz & Larsen Legacy rifle. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 175mm
Torx 20 Wrench
2 x Clearance Americase Cordura Case Cover (32x11x3")1 x Krieghoff Brass Mid Sight Bead1 x Bear Grylls Sliding Saw by Gerber2 x Contessa Picatinny Rail - Sako A7 X-Short (0 MOA)2 x Schmierfix Grease by Liqui Moly1 x Briley 20b Speed Wrench - For Krieghoff2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Silva Pavé Sport Bike Light White/Black2 x Krieghoff Pro Choke Box1 x WalkStool Set of Spare Red Spring2 x Silva Commute Bike Light - Green1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)2 x K-80 Stock Weight for Balance System1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Starkie Blue (A.K.A Smurf Poo)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Recknagel Picatinny Rail Ruger 10 / 22, Alu [..001Z]1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Silva Dine Duo Kit - Purple/White1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff C-Clips (E-Clips)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Jones Original Pad Adjuster1 x Gerber GDC Hook Knife
Manufacturers
Useful Information