Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

2 x Krieghoff Brass Mid Sight Bead2 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x K-80 Barrel Weight Balance System2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Front Sight Bead White [11442-0300]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Recknagel Front Sight Bead Red [11444-0300]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount3 x Krieghoff Sight Bead Blanking Screw1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x AimZonic Compact Camo Sound Moderator1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x VFG Adaptor for VFG Rods (Spare)1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Krieghoff Front Sight Bead (Small)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Silva Dine Duo Kit - Purple/White1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Schmierfix Grease by Liqui Moly1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Krieghoff Front Sight Bead (Standard)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Pro Choke Box1 x VFG Complete Set for .1771 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Bear Grylls Paracord Fixed Blade1 x Schultz & Larsen Professional Bipod by Spartan1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Black Barrel Case (83cm Internal)1 x Recknagel Front Ramp [12000-0000]1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Krieghoff HIVIZ Pro Sights1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Jones Gun Nut Kit1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff Navy Canvas Gun Slip1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Recknagel Safety for Mauser K98 [30100-5000]1 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Factory Hanger Pin
Manufacturers
Useful Information