Krieghoff HIVIZ Pro Sights

£48.00
20% VAT incl.


  • Model:HIVIZ-PRO
The famous HIVIZ sights with an optimized base from Krieghoff for the Krieghoff K-80 shotguns with Narrow Taper Flat 10-6mm Ribs.
The Comp sight sets the standard in sight performance for both competition and recreational use.

The original Krieghoff base prevents the HIVIZ sight from moving even with just one screw mounted to the rib! Use the original thread of the original front sight of the Krieghoff rib - no drilling - therefore the original front sight is an easy & fast exchange to the new Krieghoff HIVIZ Pro sight.

This competition shotgun sight includes eight LitePipes, in red, green and white, with four viewing end diameters stored in carrying case with key. It will come with an original Krieghoff base and screw.

Please Note - One screw for all K-80 Barrels 10-6mm Narrow Taper Flat (version built 2014 or later ). Does not fit Parcours version.
Also, this is not intended for 12-8mm Taper Flat Ribs, so please check your barrels before purchasing.
A different product is required for barrels built before 2014 and for Parcours barrels. This does require drilling a second hole into the rib for fitting

Also see:
- Krieghoff Front Sight (Small Size)
- Krieghoff Front Sight (Standard Size)
- Krieghoff Mid Bead Blanking Screw


We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff 12b Choke Wrench
Krieghoff 12b Choke Wrench
£7.50
20% VAT incl.
Schmierfix Grease by Liqui Moly
Schmierfix Grease by Liqui Moly
£6.80
20% VAT incl.
Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)2 x Schultz & Larsen Professional Bipod by Spartan1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Anschütz Biathlon Harness1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x MSA Sordin - Hygiene Kit - Foam Seals1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)
Manufacturers
Useful Information