Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
3 x Krieghoff Navy Gun Slip1 x Krieghoff Brass Front Sight Bead1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)4 x Krieghoff Trigger Screw1 x WalkStool Spare Leg Joints3 x K-80 Forward Position Trigger - Titanium1 x ERATAC Bubble Level [T0940-0002]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)4 x Krieghoff Factory Hanger Pin2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]2 x Krieghoff Choke Multi Wrench2 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Teague Precision Choke Key3 x Krieghoff Woven Fabric Patch4 x Jones Gun Nut Kit2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes3 x Jones Original Pad Adjuster4 x Krieghoff Stock Removal Wrench4 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Comb Wrench (T-Handle)2 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff "K" Mesh Cap - Black2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x MSA Sordin - Hygiene Kit - Foam Seals3 x Krieghoff Brass Mid Sight Bead3 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff C-Clips (E-Clips)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x Krieghoff Sight Bead Blanking Screw1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail2 x K-80 Forward Position Trigger - Steel2 x K-80 Forward Position Trigger - Black Titanium2 x Krieghoff 12b Choke Wrench3 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Briley 20b Speed Wrench - For Krieghoff2 x Krieghoff Front Sight Bead (Standard)1 x K-80 Standard Trigger - Gold Plated1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable5 x K-80 Standard Trigger - Titanium1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)2 x K-80 Standard Trigger - Steel2 x Krieghoff Spares Kit1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x K-80 Stock Weight for Balance System2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x EX Demo - Gerber Metolius Pocket Folder1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x LED Lenser Car Charger1 x Bauer ED 10x42 Binoculars1 x Recknagel Grip Cap Full Domed [24000-0100]1 x ERATAC Picatinny Extended Riser Mount (Nut)2 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Gerber Descent - Folding Knife2 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)2 x Krieghoff "K" Denim Cap - Grey1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Ejector Ball and Spring1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Gerber GDC Zip Blade1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Classic "Big Five" Badge1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]2 x Jones Thru-the-Pad Adjuster1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Hi Viz - How to Become a Better Shooter1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Krieghoff Pro Choke Box1 x K-80 Barrel Weight Balance System1 x Krieghoff Steel Middle Hanger (For Parcours)1 x K-80 Standard Trigger - Gold Titanium1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Black Leather Shell/Cartridge Pouch1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]
Manufacturers
Useful Information