Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]3 x WalkStool Set of Spare Red Spring1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x ERATAC Picatinny Extended Riser Mount (Nut)2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Recknagel Extended Rail Remington 700 Short [57250-0012]2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Wipe Length Stopper & Guide - Shotgun2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)2 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)2 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Black Barrel Case (83cm Internal)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa Picatinny Rail - Winchester 70 X-Long (0 MOA)1 x Gerber Myth Series Fixed Saw1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for .375 (Box of 40)2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x ERATAC Bubble Level [T0940-0002]2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Sling Swivel Loop, Wood Screw [21410-9020]1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Contessa Picatinny Rail - Tikka T3 / T3X (10 MOA)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)
Manufacturers
Useful Information