Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Jones Gun Nut Kit3 x WalkStool Set of Spare Red Spring1 x Schultz & Larsen Take Down Rifle Case1 x Jones Original Pad Adjuster1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Schultz & Larsen Professional Bipod by Spartan3 x Krieghoff Classic "Big Five" Badge1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Jones Thru-the-Pad Adjuster1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)3 x Krieghoff "K" Collectors Badge1 x Black Barrel Case (83cm Internal)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Wipe Length Stopper & Guide - Shotgun2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x Krieghoff Achievement Badge 200 Straight (Blue)2 x Krieghoff Achievement Badge 200 Straight (Black)2 x Krieghoff 2011 Badge (Collectors Badge)2 x Krieghoff 2015 Badge (Collectors Badge)3 x Krieghoff K-80 Badge "K-80 Sport" Logo2 x Krieghoff 2009 Badge (Collectors Badge)2 x Krieghoff 2012 Badge (Collector's Badge)2 x Krieghoff Achievement Badge 100/3002 x Krieghoff Achievement Badge 25 Straight2 x Gerber Gator Combo Replacement Saw2 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)2 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Gerber New Myth Series Pocket Folder2 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Winchester 3" Folding Knife1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x Gerber Paraframe II Fine Edge Knife1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Complete Set for .1771 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Walkstool Steady1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Schmierfix Grease by Liqui Moly1 x Badge - Cob Bronze1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Gerber Myth Series Fixed Saw1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Ex-Display Gerber GDC Zip Hex1 x Gerber Balance Multi-Tool Black1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)
Manufacturers
Useful Information