Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Krieghoff Navy Gun Slip2 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x Krieghoff HIVIZ Pro Sights1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master3 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Krieghoff Pro Choke Box2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA2 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa Quick Release Picatinny Rail1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO2 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Bauer HD Series 8x25 Binoculars1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II2 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)2 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount2 x Black Leather Shell/Cartridge Pouch1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ebony & Brass 20 Bore Snap Caps1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail2 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended2 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff K-Diamond Beanie - Navy1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa Browning BAR Euro Rail for Quick Release Mount2 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)2 x Krieghoff Ejector Ball and Spring1 x Schmierfix Grease by Liqui Moly2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)2 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Jones Gun Nut Kit1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x WalkStool Set of Spare Red Spring1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)2 x Jones Original Pad Adjuster1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff "K" Mesh Cap - Black1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Krieghoff Stock Removal Wrench1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x K-80 Standard Trigger - Titanium1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Krieghoff Front Sight Bead (Standard)1 x Bear Grylls Basic Survival Kit by Gerber1 x Bear Grylls Scout Essentials Kit2 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x K-80 Standard Trigger - Gold Plated1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff C-Clips (E-Clips)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)2 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)3 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (10 M1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Krieghoff 12b Choke Wrench1 x Recknagel 40mm Ring Components - 5mm BH1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Short (20 1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x CR2032 Camelion Lithium Battery1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Krieghoff "K" Logo Cap Navy & White1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x Contessa Quick Release Mount for Zeiss Rail1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Recknagel SOB Silencer ERA LOC Muzzle Adaptor Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x LED Lenser Car Charger1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Krieghoff Comb Wrench (T-Handle)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (20 MOA) Adjustable1 x Contessa Winchester 70 L Euro Rail for QR Mount1 x Gerber GDC Zip Blade1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Long (10 MOA)
Manufacturers
Useful Information