Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Bear Grylls Ultra Compact Knife1 x Bear Grylls Basic Survival Kit by Gerber1 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x K-80 Standard Trigger - Black Titanium1 x Bear Grylls Pocket Tool1 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Comb Wrench (T-Handle)1 x Bauer HD 8x42 Binoculars1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x AimZonic Plus Camo Sound Moderator1 x Krieghoff Front Sight Bead (Small)2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff Ejector Ball and Spring1 x Silva Map Measurer (Mechanical)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Gerber Metolius Pocket Folder1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Krieghoff Stock Removal Wrench1 x Krieghoff Front Sight Bead (Standard)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x AA x 4 Camelion Plus Alkaline Batteries1 x Jones Thru-the-Pad Adjuster1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Anschütz Biathlon Harness1 x Black Leather Shell/Cartridge Pouch1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Schmierfix Grease by Liqui Moly1 x K-80 Barrel Weight Balance System1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff 12b Choke Wrench1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Krieghoff "K" Mesh Cap - Black1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Spares Kit1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Bauer ED 8x42 Binoculars1 x Krieghoff "K" Denim Cap - Grey1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Steel Stock Trap Door1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel SOB3D Silencer (ERA LOC)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13552 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x Jones Gun Nut Kit1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Gerber Myth Series Fixed Saw2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser3 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x ERATAC M-Lok Picatinny Rail, 7 Slots [T5907-0008]1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Recknagel Picatinny Rail 200mm Blank No Slots, Steel [..0000]1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber GDC Zip Blade1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]
Manufacturers
Useful Information