Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
5 x Krieghoff Brass Front Sight Bead2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff Trigger Screw3 x Krieghoff Pro Choke Box2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff K80 Speed Wrench for Factory Chokes3 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Krieghoff Spares Kit1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Woven Fabric Patch1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)3 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Krieghoff K-Diamond Beanie - Navy2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff Factory Hanger Pin2 x Bauer Outdoor 10x25 Binoculars1 x Teague Precision Choke Key2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff .410g Choke Wrench1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x AA x 4 Camelion Plus Alkaline Batteries1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)2 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff Ejector Ball and Spring1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Trigger & Selector Locking Wrench1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Gerber Powerframe Knife1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Front Sight Bead (Small)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Jones Original Pad Adjuster1 x Contessa Spare Screw for Sako 75/85 Rails2 x Briley 20b Speed Wrench - For Krieghoff1 x Jones Gun Nut Kit1 x Bear Grylls Basic Survival Kit by Gerber2 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Brass Mid Sight Bead1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Krieghoff 12b Choke Wrench1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Krieghoff Extended Pillars for Adjustable Comb1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Anschütz Biathlon Harness1 x Bear Grylls Pocket Tool1 x Gerber Paraframe II Fine Edge Knife1 x Gerber Metolius Pocket Folder1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Contessa Spare Ring-to-Base Screws1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Jones Thru-the-Pad Adjuster1 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Krieghoff Comb Wrench (T-Handle)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x ERATAC Picatinny Extended Riser Mount (Nut)2 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Roessler Titan 3 / 6 (0 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher L 20 MOA, Alu [..2188]1 x Contessa Picatinny Rail - Roessler Titan 3 / 6 (10 MOA)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Adaptor for VFG Rods (Spare)
Manufacturers
Useful Information