Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Complete Set for .1771 x Krieghoff Trigger & Selector Locking Wrench2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x K-80 Stock Weight for Balance System1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Krieghoff C-Clips (E-Clips)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Adaptor for VFG Rods Brass1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]2 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Spare Ring-to-Base Screws1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Blank 12mm Eurorail - 150mm1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]
Manufacturers
Useful Information