VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Navy Gun Slip2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Jones Original Pad Adjuster1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0010]1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Gerber Balance Multi-Tool Black1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Krieghoff "K" Collectors Badge1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Gerber Gator Combo Replacement Saw1 x Gerber Myth Series Fixed Saw1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x WalkStool Spare Leg Joints1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)
Manufacturers
Useful Information