Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Brass Front Sight Bead2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Spares Kit1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Krieghoff Factory Hanger Pin1 x Krieghoff 12b Choke Wrench1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Bauer Outdoor 8x21 Binoculars1 x WalkStool Spare Leg Joints1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x WalkStool Set of Spare Red Spring1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Walkstool Steady1 x WalkStool Comfort 65 (65cm/26in)1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x AimZonic Plus Camo Sound Moderator1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Blank 12mm Eurorail - 150mm1 x AimZonic Compact Camo Sound Moderator1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Quick Release Mount for Swarovski Rail1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Replacement Polyform Lever [00088-5700]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x ERATAC ACI Bubble Level [T0940-0000]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Gerber New Myth Series Pocket Folder1 x LED Lenser Car Charger1 x Used Sako P94S, Wooden Stock (.22 LR)1 x Gerber Octane Multi-Tool Red1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x Gerber Bullrush Tactical Multi-Tool1 x Gerber Balance Multi-Tool Black1 x K-80 Standard Trigger - Steel1 x Ex-Demo K-80 Steel 12b Hanger #51 x Black Leather Shell/Cartridge Pouch
Manufacturers
Useful Information