Contessa Picatinny Rail - Sako 75/85 X-Short - Extend/Adjustable

£182.15
20% VAT incl.


  • Model:PH31N/NV/0
Contessa Picatinny Rail - Sako 75/85 X-Short - Extend/Adjustable
Contessa Extended Picatinny Rail for Sako 75* / 85 X-Short
With 0 MOA
Fits Sako Models: 75 / 85
Fits Calibres: .204 Ruger / .222 Rem / .223 Rem
(Please always double check the action size as this is a guide for the action size)

Rail Length: - 185mm
Extension Rearwards: - 50mm
Distance between Bases: - 50 - 73mm
Height (BH) - 12mm
MOA - 0 MOA
Weight: - 205g
Material: - Steel
Code Ref: PH31N/NV/0

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 1x Wrenches,
- Fitting Screws all included

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully). This is the Extended Version designed to be used with scopes such as night vision, which need to be mounted rearwards for better eye relief.

You can't always tell which size Sako action you have from the calibre, so to check which rail fits your rifle all you need to do is measure the length between your two bases, i.e. measure the length of your ejection port.
If it's approx. 56mm you need the Sako X-Short Rail
74mm you need the Sako Short Rail.
If it's approx. 84mm you need the Sako Medium Rail.
If it's approx. 94mm you need the Sako Long Rail.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 50 - 73mm / 31mm (Dovetail Base)

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video

A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases to the rifle using a file. We can instruct on a good method if this is the case - email us at sales@alanrhone.com

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Spares Kit1 x Krieghoff Navy Gun Slip1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Grip Cap Compartment2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Gerber GDC Zip Blade1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Adaptor for VFG Rods Brass2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail4 x Contessa QD Both Extended Picatinny Rails Mount for Blaser3 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail3 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)3 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)3 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor4 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor3 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Wipe Length Stopper & Guide - Shotgun2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm3 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Contessa Picatinny Rail - Remington 700 Long (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Schultz & Larsen Torx Key for Scope Mounts3 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Complete Set for .1771 x VFG Barrel Cleaning Felts for 8mm (Box of 50)2 x Winchester 3" Folding Knife1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Black Barrel Case (83cm Internal)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)
£19,352.27
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Picatinny Rail - Blaser R8/R93 (0 MOA) Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA) Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)