VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£7.24
20% VAT incl.


  • Model:332066
VFG Barrel Cleaning Felts for 4-4.5mm
Code: (66800) 332066


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 100 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Spares Kit1 x Krieghoff Navy Gun Slip1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Grip Cap Compartment2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Gerber GDC Zip Blade1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Adaptor for VFG Rods Brass2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Contessa Picatinny Rail - Remington 700 Long (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail
Manufacturers
Useful Information