Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Recknagel SOB3D Silencer (ERA LOC)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount2 x Black Barrel Case (83cm Internal)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)2 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Black Leather Shell/Cartridge Pouch1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Schultz & Larsen Professional Bipod by Spartan2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Anschütz Biathlon Harness1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Hi Viz - How to Become a Better Shooter1 x Gerber GDC Zip Blade1 x Gerber Myth Series Fixed Saw1 x Winchester 3" Folding Knife1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Jones Thru-the-Pad Adjuster1 x Jones Original Pad Adjuster1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Jones Gun Nut Kit1 x Contessa Quick Release Picatinny Rail1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Ex-Display Gerber GDC Zip Hex1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Gerber Basic Fixed Blade Serrated
Manufacturers
Useful Information