VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)

£12.47
20% VAT incl.


  • Model:332059
VFG Barrel Intensive Cleaning Felts for 20 Bore
Code: 332059


These felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel barrel

The 20 Bore felts are to be used for 20 Bore Shotguns only

Supplied as small box containing:
25 intensive felt screw-on pellets


Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>
1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Sight Bead Blanking Screw1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x LED Lenser Car Charger1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Krieghoff Woven Fabric Patch1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)
Manufacturers
Useful Information