Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x K-80 Stock Weight for Balance System1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Recknagel Replacement Polyform Lever [00088-5700]1 x AimZonic Compact Camo Sound Moderator1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x LED Lenser Intelligent Filter Set with Holster1 x Krieghoff "K" Mesh Cap - Black1 x Gerber GDC Zip Blade1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)2 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Gerber Balance Multi-Tool Black1 x Gerber Dime Multi-Tool (Lime)1 x Gerber Gator Combo Replacement Saw1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Quick Release Mount for Swarovski Rail1 x Gerber Octane Multi-Tool Red1 x Bear Grylls Compact Multi-Tool by Gerber1 x EX Demo - Gerber Metolius Pocket Folder1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser
Manufacturers
Useful Information