Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
4 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Pro Choke Box2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)4 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Navy Gun Slip1 x Krieghoff Trigger Screw1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)3 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff HIVIZ Pro Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x VFG Wipe Length Stopper & Guide - Shotgun1 x Krieghoff Brass Mid Sight Bead1 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff "K" Logo Cap Navy & White1 x Schmierfix Grease by Liqui Moly2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x LED Lenser Car Charger1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Silva Commute Bike Light - Pink1 x Silva Dine Duo Kit - Purple/White1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Recknagel Grip Cap Compartment1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Bauer ED 8x42 Binoculars1 x Jones Thru-the-Pad Adjuster1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)2 x Contessa Spare Screw for Sako 75/85 Rails2 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Spare Screw M10 for Anschutz/CZ Rails2 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x VFG Complete Set for .1771 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Black Leather Shell/Cartridge Pouch1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Bauer Outdoor 10x25 Binoculars1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Silva Pavé Sport Bike Light White/Black1 x Winchester 3" Folding Knife1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Silva Map Measurer (Mechanical)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Adaptor for VFG Rods (Spare)1 x CR2032 Camelion Lithium Battery1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Steel Stock Trap Door1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Bauer HD Series 8x25 Binoculars1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Schultz & Larsen T-Handle Wrench (Torx 20)
Manufacturers
Useful Information