Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master4 x Krieghoff Sight Bead Blanking Screw1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Silva Dine Duo Kit - Purple/White1 x Bear Grylls Paracord Fixed Blade1 x VFG Complete Set for .1771 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel Safety for Mauser K98 [30100-5000]1 x EX Demo - Gerber Metolius Pocket Folder2 x Clearance Americase Cordura Case Cover (32x11x3")1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Badge - Cob Bronze2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x LED Lenser Car Charger1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended2 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Jones Gun Nut Kit1 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x K-80 Barrel Weight Balance System1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Brass Mid Sight Bead2 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Jones Original Pad Adjuster1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Jones Thru-the-Pad Adjuster1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x ERATAC Bubble Level [T0940-0002]
Manufacturers
Useful Information