Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount2 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Jones Original Pad Adjuster1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa One Piece QD Picatinny Mount for Zeiss Rail2 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)2 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)2 x Schmierfix Grease by Liqui Moly1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Browning A Bolt 3 Short (0 MOA)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (10 M2 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Krieghoff Sight Bead Blanking Screw1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Blank 12mm Eurorail - 150mm1 x Krieghoff Ejector Ball and Spring1 x Krieghoff 12b Choke Wrench1 x Jones Gun Nut Kit1 x Krieghoff Brass Mid Sight Bead1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Black Leather Shell/Cartridge Pouch1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Krieghoff Extended Pillars for Adjustable Comb1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Long (20 MOA)1 x Contessa Picatinny Rail - CZ 527 (20 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Custom Rifles of Great Britain by Bruce Potts1 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13551 x Recknagel Safety for Mauser K98 [30100-5000]1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]2 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Picatinny Rail - Browning X Bolt Super Short (0 MOA)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Gerber Myth Series Fixed Saw1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x AAA x 4 Camelion Plus Alkaline Batteries
Manufacturers
Useful Information