Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

4 x Clearance Americase Cordura Case Cover (32x11x3")1 x Clearance Americase Cordura Case Cover (37x11x3.5")1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Gerber Bullrush Tactical Multi-Tool1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)1 x Gerber New Myth Series Pocket Folder1 x Gerber Paraframe II Fine Edge Knife2 x Gerber Metolius Pocket Folder1 x Gerber Powerframe Knife2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)2 x Krieghoff Spares Kit2 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Krieghoff Navy Canvas Gun Slip2 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Schultz & Larsen Take Down Rifle Case2 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Krieghoff Trigger Screw3 x Chamber Brush 20b1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)3 x AA x 4 Camelion Plus Alkaline Batteries1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x WalkStool Comfort 65 (65cm/26in)3 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Krieghoff Stock Removal Wrench2 x Krieghoff Factory Hanger Pin1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Jones Thru-the-Pad Adjuster1 x K-80 Standard Trigger - Titanium1 x Schmierfix Grease by Liqui Moly1 x K-80 Forward Position Trigger - Titanium1 x Jones Gun Nut Kit1 x Krieghoff Comb Wrench (T-Handle)2 x Bauer Outdoor 8x21 Binoculars1 x D Cell x 2 Camelion Plus Alkaline Batteries2 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff 2011 Badge (Collectors Badge)2 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)3 x Bauer HD Series 8x25 Binoculars2 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff "K" Mesh Cap - Black1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)2 x Bauer ED 8x50 Binoculars1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Steel Stock Trap Door1 x Krieghoff 2009 Badge (Collectors Badge)3 x AimZonic Compact Camo Sound Moderator1 x Custom Rifles of Great Britain by Bruce Potts1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]3 x AimZonic Plus Camo Sound Moderator2 x Badge - Cob Bronze2 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Bauer HD 8x42 Binoculars1 x Bauer ED 8x32 Binoculars2 x CR2032 Camelion Lithium Battery1 x Bear Grylls Scout Essentials Kit2 x Hi Viz - How to Become a Better Shooter2 x Ebony & Brass 20 Bore Snap Caps2 x Krieghoff Achievement Badge 200 Straight (Black)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Bauer HD 8.5x50 Binoculars1 x Bauer HD 8x56 Binoculars1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Krieghoff "K" Denim Cap - Grey3 x AG3 / 392A Alkaline Batteries (10 Pack)2 x Krieghoff Sight Bead Blanking Screw1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff 2012 Badge (Collector's Badge)1 x Ebony & Brass Cleaning Rod1 x Bauer ED 10x42 Binoculars2 x Krieghoff 2015 Badge (Collectors Badge)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Achievement Badge 100/3001 x Bear Grylls Basic Survival Kit by Gerber1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Krieghoff Pro Choke Box1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Brass Mid Sight Bead1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Gerber Octane Multi-Tool Red1 x Recknagel SOB3D Silencer (Standard Thread)1 x Anschütz Biathlon Harness
Manufacturers
Useful Information