Contessa QD Mount for ATN 4K Night Vision (Picatinny)

£390.31
20% VAT incl.


  • Model:SBP10
Contessa QD Mount for ATN 4K Night Vision (Picatinny)
Contessa, Quick Detachable Mount for Picatinny
Designed for the ATN 4K Night Vision Scope

Length: 160mm
Length of Picatinny on Ring Cap: 35mm
Height with Rings (BH): 18.5mm
Height without Rings (BH): 12.5mm
Weight: 275g
Code: SBP10
Extends Backwards from Rear Lug: 65mm
Distance Between Rings: 109mm

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel
- Complete with screws for mounting the Pulsar

The Contessa Quick Release Mount for ATN 4K features two 30mm Rings spaced perfectly apart to be able to mount the scope. The front ring has a Universal Interface Ring Cap with a 35mm Picatinny Rail offset to the one side, to be able to mount a UV Lamp. This ring cap can be swapped with the rear ring cap and the section of picatinny mounted to the right of left side.

The mount will fit any existing picatinny rail and uses a solid recoil lug bar on the underside of the mount, with a quick release lever to lock the rail onto the picatinny rail. Due to the quick release lever being set at the same tension when attached, the mount retains the same solid mount each time you fit it back on to the picatinny rail. Although the method of attachment is highly accurate, due to the nature of the picatinny system, it may not always be possible to achieve 100% repeatable zero depending on the mounting procedure, but the accuracy will certainly be within 1 MOA. This is common throughout the whole Contessa Quick Release series.

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here


Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

VFG Barrel Cleaning Felts for 6mm (Box of 50)
VFG Barrel Cleaning Felts for 6mm (Box of 50)
£7.48
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor3 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Anschütz Biathlon Harness1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Briley 20b Speed Wrench - For Krieghoff1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Black Barrel Case (83cm Internal)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel 30mm Ring Components - 5mm BH1 x Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]
£4,991.29
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa One Piece QD Picatinny Mount with Rings Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Contessa QD Mount for ATN 4K Night Vision (Picatinny)