Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Factory Hanger Pin1 x Krieghoff HIVIZ Pro Sights2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Krieghoff Trigger Screw1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm3 x K-80 Stock Weight for Balance System1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Bauer Outdoor 8x21 Binoculars1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Front Sight Bead Red [11444-0300]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Quick Release Mount for Swarovski Rail1 x Bauer Outdoor 10x25 Binoculars1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail2 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Krieghoff 12b Choke Wrench1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount for Burris/Nikon1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff C-Clips (E-Clips)1 x Recknagel Barrel Banded Front Ramp [12530-....]2 x Krieghoff Navy Gun Slip1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Choke Multi Wrench1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Silva Commute Bike Light - Pink1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Krieghoff 2012 Badge (Collector's Badge)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Achievement Badge 25 Straight1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Black Leather Shell/Cartridge Pouch1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x K-80 Standard Trigger - Titanium1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench
Manufacturers
Useful Information