Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)2 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount2 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount3 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Teague Precision Choke Key2 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Schmierfix Grease by Liqui Moly1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Bauer HD Series 8x25 Binoculars1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger & Selector Locking Wrench1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Krieghoff "K" Mesh Cap - Black
Manufacturers
Useful Information