Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Jones Original Pad Adjuster1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Jones Gun Nut Kit1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Professional Bipod by Spartan2 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen Red Recoil Pad1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x Schmierfix Grease by Liqui Moly1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser
Manufacturers
Useful Information