Kick-Eez Trap (401)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ401
This pad has a concave face and was designed especially for "Fixed Position" trapshooting.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black
Measurements (All 401 Series Pad):
Width - 52mm / 2.04"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad:
401-6 - 19mm (0.75") Thick / Weight: 158 g
401-8 - 23mm (0.94") Thick / Weight: 197 g
401-10 - 29.5mm (1.16") Thick / Weight: 235 g
(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 301 - All Purpose
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: A. Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

1 x VFG Barrel Cleaning Felts for .22 (Box of 80)3 x Contessa Picatinny Rail - Sako S20 (20 MOA)3 x VFG Complete Set for .1771 x VFG Wipe Length Stopper & Guide for Rifles2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Shell Bag1 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended3 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff "K" Bobble Beanie - Royal Blue1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Grey1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu2 x Krieghoff C-Clips (E-Clips)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Silva Dine Duo Kit - Purple/White1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x K-80 Forward Position Trigger - Black Titanium1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Black Barrel Case (83cm Internal)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Krieghoff 12b Choke Wrench1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Adaptor for VFG Rods Brass
Manufacturers
Useful Information