Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)3 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x VFG Barrel Cleaning Felts for 7mm (Box of 50)3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)3 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)3 x VFG Barrel Cleaning Felts for .22 (Box of 500)3 x VFG Barrel Cleaning Felts for .22 (Box of 80)3 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG Barrel Cleaning Felts for .45 (Box of 30)3 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor3 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG Quick Clean Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Krieghoff HIVIZ Pro Sights1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Spares Kit1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Schultz & Larsen Weaver Rings 30mm, 4mm BH, Steel1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Adaptor for VFG Rods Brass1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Black Leather Shell/Cartridge Pouch1 x Schmierfix Grease by Liqui Moly1 x Black Barrel Case (83cm Internal)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Gerber Basic Fixed Blade Serrated1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Front Sight Bead Red [11444-0300]1 x Recknagel Front Ramp [12000-0000]1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Hood for Front Ramp [13020-1580]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Quick Release Picatinny Rail1 x Contessa Quick Release Mount for Burris/Nikon1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]
Manufacturers
Useful Information