Schultz & Larsen Scope Rings 30mm, Low (7mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6022
Schultz & Larsen Scope Rings
30mm - Low (7mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 92g
Ring Diameter - 30mm
Base Height (BH) - 7mm
Code Ref: SL6022

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff HIVIZ Pro Sights1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Parker Hale Thread to 8-32 Thread Converter1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger Screw1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Woven Fabric Patch1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Brass Front Sight Bead1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x LED Lenser Intelligent Filter Set with Holster1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Krieghoff Front Sight Bead (Standard)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Quick Release Mount for Zeiss Rail1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Gerber Basic Fixed Blade Serrated1 x Contessa Quick Release Mount for Swarovski Rail1 x Gerber Metolius Pocket Folder1 x Silva ex10 Distance Pedometer - White1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator
Manufacturers
Useful Information