Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Anschütz Biathlon Harness3 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Picatinny Rail Ruger 10 / 22, Alu [..001Z]1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Krieghoff Trigger Screw1 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Teague Precision Choke Key3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Black Barrel Case (83cm Internal)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Krieghoff Brass Mid Sight Bead1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Starkie Blue (A.K.A Smurf Poo)1 x Schmierfix Grease by Liqui Moly1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x AimZonic Compact Camo Sound Moderator1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Bauer Outdoor 8x21 Binoculars1 x Jones Thru-the-Pad Adjuster1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x WalkStool Comfort 65 (65cm/26in)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Jones Original Pad Adjuster1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff 12b Choke Wrench1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)
Manufacturers
Useful Information