Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Winchester 3" Folding Knife2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Krieghoff HIVIZ Pro Sights3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)4 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)5 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)4 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)4 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)3 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)3 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)4 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]4 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Bauer HD Series 8x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x VFG Adaptor for VFG Rods (Spare)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x AimZonic Compact Camo Sound Moderator2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]2 x Krieghoff Sight Bead Blanking Screw2 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x CR2032 Camelion Lithium Battery1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Briley T Wrench for K-80 Parcours Briley Chokes3 x Schmierfix Grease by Liqui Moly1 x Ebony & Brass 20 Bore Snap Caps1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x WalkStool Comfort 65 (65cm/26in)3 x Krieghoff "K" Logo Cap Black & White2 x Black Barrel Case (83cm Internal)1 x WalkStool Set of Spare Red Spring2 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Ejector Ball and Spring1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff "K" Mesh Cap - Black3 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Walkstool Steady1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)3 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Jones Thru-the-Pad Adjuster2 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Jones Original Pad Adjuster2 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Schultz & Larsen Take Down Rifle Case1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)3 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Jones Gun Nut Kit1 x Krieghoff Front Sight Bead (Standard)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for .375 (Box of 40)2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser3 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Spare Ring-to-Base Screws3 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Krieghoff Woven Fabric Patch1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Spare Screw for Sako 75/85 Rails1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x K-80 Standard Trigger - Gold Plated1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]2 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Krieghoff Comb Wrench (T-Handle)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schultz & Larsen Torx Key for Scope Mounts2 x Gerber Basic Fixed Blade Serrated1 x Krieghoff Choke Multi Wrench1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Quick Release Picatinny Rail1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Gerber Powerframe Knife1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Bauer ED 8x50 Binoculars1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff K-Diamond Beanie - Navy1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Krieghoff Shell Bag1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)2 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Krieghoff Classic "Big Five" Badge1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Starkie Blue (A.K.A Smurf Poo)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Short (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Steel [..2112]1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x ERATAC ACI Elevation Turret [T0941-0000]1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel Grip Cap Compartment1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]
Manufacturers
Useful Information