Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff Spares Kit1 x Krieghoff Front Sight Bead (Standard)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Krieghoff "K" Denim Cap - Grey1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Choke Multi Wrench1 x K-80 Standard Trigger - Black Titanium1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Ejector Ball and Spring1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel SOB Silencer ERA LOC Muzzle Adaptor Wrench1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Black Barrel Case (83cm Internal)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]2 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Pro Choke Box1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x K-80 Standard Trigger - Gold Plated1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x WalkStool Spare Leg Joints1 x Schmierfix Grease by Liqui Moly1 x Walkstool Steady1 x Silva Dine Duo Kit - Turquoise/White1 x Winchester 3" Folding Knife2 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Gerber Dime Multi-Tool (Lime)1 x Silva Commute Bike Light - Green1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Bear Grylls Compact Multi-Tool by Gerber1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Gerber Gator Combo Replacement Saw1 x DMT Diafold Magna-Guide Kit1 x ERATAC ACI Bubble Level [T0940-0000]1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Gerber Powerframe Knife1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount
Manufacturers
Useful Information