Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Woven Fabric Patch2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Gerber GDC Zip Blade1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)2 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]2 x Krieghoff Sight Bead Blanking Screw1 x Recknagel SOB3D Silencer (Standard Thread)3 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel SOB3D Silencer (ERA LOC)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x ERATAC Bubble Level [T0940-0002]2 x Krieghoff Brass Front Sight Bead2 x WalkStool Spare Leg Joints1 x WalkStool Comfort 65 (65cm/26in)2 x AimZonic Compact Camo Sound Moderator3 x MSA Sordin - Hygiene Kit - Foam Seals3 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]3 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Krieghoff Ejector Ball and Spring2 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Krieghoff Spares Kit3 x Bauer HD Series 8x25 Binoculars2 x Krieghoff Brass Mid Sight Bead1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Jones Original Pad Adjuster1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x K-80 Stock Weight for Balance System1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)4 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)2 x Krieghoff 12b Choke Wrench1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff Stock Removal Wrench2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff 28b Choke Wrench2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail3 x Krieghoff Comb Wrench (T-Handle)1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Krieghoff .410g Choke Wrench1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Spare Ring-to-Base Screws1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II2 x ERATAC Two-Piece Picatinny Rings (Lever)1 x Bauer HD 8x42 Binoculars1 x Bear Grylls Basic Survival Kit by Gerber1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Krieghoff Trigger Screw2 x Krieghoff "K" Logo Cap Black & White1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)2 x Bauer HD 8x56 Binoculars1 x K-80 Standard Trigger - Steel1 x Bear Grylls Scout Essentials Kit1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Recknagel Steel Stock Trap Door1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x K-80 Standard Trigger - Black Titanium1 x AimZonic Plus Camo Sound Moderator1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Recknagel 30mm Ring Components - 5mm BH1 x Recknagel 34mm Ring Components - 5mm BH1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x EX Demo - Gerber Metolius Pocket Folder1 x Krieghoff "K" Collectors Badge1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x ERATAC Picatinny Riser Mount Block (QD)1 x WalkStool Set of Spare Red Spring1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount1 x Krieghoff "K" Logo Cap Navy & White1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Krieghoff "K" Denim Cap - Grey2 x Walkstool Steady1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x Krieghoff Classic "Big Five" Badge1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud
Manufacturers
Useful Information