Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

7 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x AimZonic Plus Camo Sound Moderator1 x AimZonic Compact Camo Sound Moderator2 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]2 x Anschütz Biathlon Harness2 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount2 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)2 x Recknagel Spare Tri-Nut Wrench 00088-00862 x Recknagel Replacement Polyform Lever [00088-5700]2 x ERATAC Picatinny Extended Riser Mount (Nut)3 x Contessa Picatinny Rail - Tikka M55 (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]2 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Recknagel Zeiss Rail 70º Components - 4mm BH2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schmierfix Grease by Liqui Moly3 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Krieghoff "K" Logo Cap Navy & White1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Krieghoff Spares Kit1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel SOB3D Silencer (Standard Thread)2 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel SOB3D Silencer (ERA LOC)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Krieghoff Factory Hanger Pin1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Krieghoff Trigger Screw1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Krieghoff 12b Choke Wrench1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Krieghoff Navy Canvas Gun Slip1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)
Manufacturers
Useful Information