Krieghoff Waterproof Shooting Jacket

£360.00
20% VAT incl.

Available Options

  • Model:KWJ-RH


The New Krieghoff Waterproof Shooting Jacket
Right-Hand or Left-Hand


A jacket designed and produced for clay shooters. The Krieghoff Waterproof Shooting Jacket combines comfort with practicality for any shooter in wet and wild conditions. The jacket itself is fully waterproof and will keep you warm and dry in the toughest conditions. Durable waterproof fabric beads rain away and the non-slip "Faux Suede" shoulder patch provides the perfect mounting surface. Large easy access shell pockets with drainage holes make the jacket fully accessible. There is no other Shooting Jacket like it.

- Fully Waterproof
- Machine Washable
- Large Cartridge Pockets
- Outside Top Pocket
- Double Zip & Press Stud Fastening
- Zipped Quick Access Pocket in Flap
- Inside Zipped Pocket
- Fleece Lining with Quilted Sleeves
- Velcro Adjustable Storm Cuffs
- Polyester "Faux Suede" Shooting patch, with "stay flat" stitching
- Shooter's Collar, keeps the back of your neck dry but does not interfere with the gun mount.
- Longer back panel and draw cord
- Right or Left Hand Options
- Made Exclusively for Krieghoff in the UK

Fully Waterproof
Outer fabric is a hard wearing polyester weave with a laminated BPU (breathable polyurethane coating), the fabric is fully waterproof and is tested to 8000mm hydrostatic head, the breathability is rated very good with a Ret 6 rating. Seams and embroidery on the garment are tape sealed on the inside to maintain the garments waterproof ability.

Waterproofing
The garments first barrier against water penetration is the DWR (durable water repellent) coating on the outside of the fabric, allowing water to bead up and roll off rather than soaking into the garment "wetting out". Proper care and treatment can help restore the DWR coating and its properties to increase the garments performance which will extend its life.

Krieghoff Waterproof Jacket Information Download >>>

Warning
Any additional embroidery will penetrate the waterproof membrane and destroy the jacket's waterproof ability.


Colours: Navy and Royal Waterproof Fabric with Blue Faux Suede Detail. White Embroidery. Black Fleece and Black Quilted Lining.

Sizes Available (Chest Sizes):
Small - 34-36" (86-91cm) Right-Hand Only
Medium - 38-40" (96-101m) Right-Hand & Left-Hand
Large - 42-44" (106-111cm) Right-Hand & Left-Hand
X-Large - 46-48" (116-121cm) Right-Hand & Left-Hand
XX-Large - 50-52" (126-131cm) Right-Hand & Left-Hand
3X-Large - 54-56" (133-138cm) Right-Hand Only

More Sizes will be available



You might also like...

7 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x AimZonic Plus Camo Sound Moderator1 x AimZonic Compact Camo Sound Moderator2 x Anschütz Biathlon Harness2 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)2 x Recknagel Replacement Polyform Lever [00088-5700]2 x ERATAC Picatinny Extended Riser Mount (Nut)3 x Contessa Picatinny Rail - Tikka M55 (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]2 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Recknagel Zeiss Rail 70º Components - 4mm BH2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Contessa Picatinny Rail - Ruger American (0 MOA)2 x Krieghoff "K" Logo Cap Navy & White1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Krieghoff Spares Kit1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel SOB3D Silencer (Standard Thread)2 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel SOB3D Silencer (ERA LOC)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Krieghoff Factory Hanger Pin1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Krieghoff Trigger Screw1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Krieghoff 12b Choke Wrench1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Krieghoff Navy Canvas Gun Slip1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)
Manufacturers
Useful Information