VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Custom Rifles of Great Britain by Bruce Potts1 x Briley 20b Speed Wrench - For Krieghoff2 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x K-80 Forward Position Trigger - Steel1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x K-80 Forward Position Trigger - Titanium1 x Walkstool Steady1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Stock Removal Wrench2 x Krieghoff Extended Pillars for Adjustable Comb1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount3 x Krieghoff Spares Kit1 x Krieghoff Comb Wrench (T-Handle)1 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]3 x Krieghoff Front Sight Bead (Small)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff K-Diamond Beanie - Navy1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Gerber GDC Zip Blade1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff K-Diamond Beanie - Heather Grey2 x Contessa Spare Ring-to-Base Screws1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Brass Mid Sight Bead1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Woven Fabric Patch1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x K-80 Standard Trigger - Black Titanium1 x K-80 Standard Trigger - Titanium1 x Krieghoff HIVIZ Pro Sights1 x Gerber Metolius Pocket Folder1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa Quick Release Mount for Zeiss Rail2 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff C-Clips (E-Clips)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Trigger Screw1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber New Myth Series Pocket Folder2 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Winchester 3" Folding Knife1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]
Manufacturers
Useful Information