Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Krieghoff Brass Front Sight Bead2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x AimZonic Plus Camo Sound Moderator1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)3 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Ebony & Brass 20 Bore Snap Caps1 x Black Barrel Case (83cm Internal)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Brass Mid Sight Bead2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Bauer HD Series 8x25 Binoculars1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Starkie Blue (A.K.A Smurf Poo)2 x Jones Thru-the-Pad Adjuster1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for .375 (Box of 500)3 x Schmierfix Grease by Liqui Moly1 x Krieghoff Navy Gun Slip1 x Black Leather Shell/Cartridge Pouch1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)3 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Jones Original Pad Adjuster1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)2 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]2 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Bauer ED 10x42 Binoculars1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Masterpiece Banded Front Ramp [12520-0180]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Ex-Demo K-80 Steel 12b Hanger #51 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13551 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]2 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)
Manufacturers
Useful Information