Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)3 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes3 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x Krieghoff Brass Front Sight Bead2 x Krieghoff Spares Kit2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Pro Choke Box3 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff HIVIZ Pro Sights2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Teague Precision Choke Key2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Schultz & Larsen Take Down Rifle Case2 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Schmierfix Grease by Liqui Moly2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x ERATAC Bubble Level [T0940-0002]1 x VFG Complete Set for .1771 x Recknagel SOB3D Silencer (ERA LOC)1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Adaptor for VFG Rods Brass2 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x VFG Pull Through Pocket Set for .22 Upwards3 x Bauer Outdoor 10x25 Binoculars2 x Bauer HD Series 8x25 Binoculars1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Bauer Outdoor 8x21 Binoculars1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x AimZonic Compact Camo Sound Moderator1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Magnetic Felt Clamps for Vices - 80mm2 x AimZonic Plus Camo Sound Moderator1 x Anschütz Biathlon Harness1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Jones Thru-the-Pad Adjuster1 x Jones Gun Nut Kit1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Jones Original Pad Adjuster1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Gerber Metolius Pocket Folder1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Front Sight Bead (Standard)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Gerber Gator Combo Replacement Saw1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)2 x AAA x 4 Camelion Plus Alkaline Batteries1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Bauer ED 8x32 Binoculars1 x Krieghoff Trigger Screw1 x Bauer ED 8x42 Binoculars1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff K-Diamond Beanie - Grey1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Bauer ED 8x50 Binoculars1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Bauer - One Piece Railmount 25.4mm (11mm High)
Manufacturers
Useful Information