Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)

£148.61
20% VAT incl.


  • Model:PH13/C/20
Contessa Satin Chromed Picatinny Rail for Sako 85 Medium
With 20 MOA
Fits Sako Models: 75* / 85

Rail Length: - 144mm
Height (BH) - 12.5mm Approx.
Weight: - 165g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 84mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)2 x Black Barrel Case (83cm Internal)2 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel SOB01 Silencer (Standard Thread)2 x Recknagel Picatinny Bases - Schultz & Larsen1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor3 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23115-5010]1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)2 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Anschütz Biathlon Harness1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable3 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)2 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)2 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Ex-Display Gerber GDC Zip Hex2 x Gerber Metolius Pocket Folder1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)2 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud4 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]3 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)3 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)3 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Contessa Picatinny Rail - Winchester 70 Long (10 MOA)2 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x ERATAC ACI Bubble Level [T0940-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Schultz & Larsen Red Recoil Pad1 x Schmierfix Grease by Liqui Moly1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Silva Map Measurer (Mechanical)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable2 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Rail - Winchester 70 Short (10 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Gerber Powerframe Knife1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)2 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]2 x VFG Pull Through Pocket Set for .22 Upwards1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Gerber Myth Series Fixed Saw1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Gerber Balance Multi-Tool Black1 x Gerber Paraframe II Fine Edge Knife1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Gerber Gator Combo Replacement Saw1 x Gerber Octane Multi-Tool Red1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Silva ex10 Distance Pedometer - White1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Bear Grylls Compact Multi-Tool by Gerber1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Krieghoff Achievement Badge 100/3001 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Picatinny Rail Marlin 1894, Alu [..001V]1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA)1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)
Manufacturers
Useful Information