Contessa Picatinny Rail - Sako 75/85 Long (0 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/0
Contessa Picatinny Rail for Sako 75 / 85 Long
With 0 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
MOA - 0 MOA
Material: - Steel
Code Ref: PH14N/0

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video

Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)
The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]2 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Spare Screw for Sako 75/85 Rails2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Briley 20b Speed Wrench - For Krieghoff2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Black1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (10 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Sight Bead Blanking Screw1 x Jones Gun Nut Kit1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]2 x Schmierfix Grease by Liqui Moly2 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Adaptor for VFG Rods Brass2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Rail - Browning X Bolt Long (20 MOA)1 x Walkstool Steady1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Krieghoff Achievement Badge 200 Straight (Blue)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA)2 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x ERATAC ACI Elevation Turret [T0941-0000]2 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x ERATAC ACI Bubble Level [T0940-0000]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Krieghoff Achievement Badge 100/3001 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Front Sight Bead White [11442-0300]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Gerber Metolius Pocket Folder1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Black Barrel Case (83cm Internal)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (10 MOA)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Picatinny Rail Browning X Bolt Short, 20 MOA, Alu1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Weaver Bases - Sauer 100/101 New [..-302Y]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff 2012 Badge (Collector's Badge)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x EX Demo - Gerber Metolius Pocket Folder1 x Hi Viz - How to Become a Better Shooter1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Gerber Myth Series Fixed Saw1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Stock Shield - Oval Contoured1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]
Manufacturers
Useful Information