K-80 Barrel Weight Balance System

£100.00
20% VAT incl.


  • Model:K80BRLW12
K-80 Balance System

The Barrel Weights are positioned under the forearm so are invisible in use. Each pair of weights are 40 g. The weights are 52mm in length, so 3 weights are 156mm and a total of three pairs can be fitted under the forearm, adding a total of 120 g.
This Krieghoff Barrel Weight is for 12b Barrels.
There are no Barrel Weights available for 20b Barrels unfortunately.

Also available for the K-80 Balance System are the K-80 Stock Weights, combining both systems provides maximum flexibility in handling configuration.

Contents Supplied
1 x Krieghoff K-80 12b Barrel Weight
1 x Fitting Wrench
2 x Spare Screws

Only One Pair of weights Supplied. You can fit a total of 3 pairs per K-80 underneath the forearm.

The barrel weights are recommended by Krieghoff to be fitted underneath the forearm. Fitting them in any other place on the barrel is not recommended and is not covered by Krieghoff warranty.

Please see the Krieghoff Barrel Weight Installation Guide

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Trigger Screw
Krieghoff Trigger Screw
£1.00
20% VAT incl.
Krieghoff C-Clips (E-Clips)
Krieghoff C-Clips (E-Clips)
£1.00
20% VAT incl.
1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Spare Screw for Sako 75/85 Rails2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)
Manufacturers
Useful Information