VFG Barrel Cleaning Felts for .44 (Box of 250)

£19.95
20% VAT incl.


  • Model:331975
VFG Barrel Cleaning Felts for .44 Calibre
Code: 331975


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .44 MAG calibres.

The .44 felts are recommended for the following calibres: .44 Mag
See which Felts suit your Calibre >>>

Supplied as small box containing: 250 felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Spare Screw for Sako 75/85 Rails2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Black1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (10 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Sight Bead Blanking Screw1 x Jones Gun Nut Kit1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]2 x Schmierfix Grease by Liqui Moly1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor for VFG Rods Brass1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Rail - Browning X Bolt Long (20 MOA)1 x Walkstool Steady1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Krieghoff Achievement Badge 200 Straight (Blue)
Manufacturers
Useful Information