K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

5 x Krieghoff Navy Gun Slip2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)4 x Gerber Paraframe II Fine Edge Knife3 x Gerber Basic Fixed Blade Serrated2 x Gerber Dime Multi-Tool (Lime)1 x Bear Grylls Paracord Fixed Blade6 x Gerber Metolius Pocket Folder1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)4 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x Anschütz Biathlon Harness2 x Ex-Demo K-80 Steel 12b Hanger #62 x Ex-Demo K-80 Steel 12b Hanger #51 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)2 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)4 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)3 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)3 x EX Demo - Gerber Metolius Pocket Folder4 x Winchester 3" Folding Knife2 x Krieghoff Brass Front Sight Bead1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x K-80 Barrel Weight Balance System1 x Krieghoff "K" Mesh Cap - Black3 x Krieghoff "K" Logo Cap Black & White1 x Used Sako P94S, Wooden Stock (.22 LR)2 x Gerber Octane Multi-Tool Red2 x Bauer - One Piece Railmount 25.4mm (11mm High)2 x Silva Map Measurer (Mechanical)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Silva Pavé Sport Bike Light White/Black1 x Gerber Balance Multi-Tool Black1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)2 x Silva Commute Bike Light - Pink1 x Silva Commute Bike Light - Green1 x Silva Dine Duo Kit - Purple/White1 x LED Lenser Intelligent Filter Set with Holster2 x Silva Dine Duo Kit - Turquoise/White1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount3 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw2 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)3 x Krieghoff Front Sight Bead (Small)2 x Krieghoff Comb Wrench (T-Handle)1 x Black Barrel Case (83cm Internal)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)4 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)4 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)3 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff K-Diamond Beanie - Grey2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Jones Original Pad Adjuster3 x Krieghoff "K" Denim Cap - Navy1 x Custom Rifles of Great Britain by Bruce Potts1 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Jones Gun Nut Kit1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Bear Grylls Scout Essentials Kit1 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x MSA Sordin - Hygiene Kit - Foam Seals2 x Krieghoff Brass Mid Sight Bead1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x LED Lenser Car Charger1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Bauer ED 8x32 Binoculars1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]2 x Krieghoff Shell Bag2 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Silva ex10 Distance Pedometer - White1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Bear Grylls Pocket Tool1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa Quick Release Mount for Zeiss Rail1 x Gerber GDC Zip Blade1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x Krieghoff K-Diamond Beanie - Heather Navy1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff .410g Choke Wrench2 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-Diamond Beanie - Heather Grey2 x Krieghoff Factory Hanger Pin1 x Krieghoff Spares Kit1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff 28b Choke Wrench1 x Krieghoff Steel Middle Hanger (For Parcours)1 x K-80 Forward Position Trigger - Steel1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Schultz & Larsen Professional Bipod by Spartan1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Adaptor for VFG Rods (Spare)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Stock Removal Wrench1 x K-80 Standard Trigger - Steel1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Krieghoff Front Sight Bead (Standard)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff 12b Choke Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Gerber New Myth Series Pocket Folder
Manufacturers
Useful Information