Schultz & Larsen Scope Rings 25.4mm, Med (11mm BH)

£170.00
20% VAT incl.

Available Options

  • Model:SL6014
Schultz & Larsen Scope Rings
25.4mm / 1 inch - Medium (11mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 102g
Ring Diameter - 25.4mm / 1 Inch
Base Height (BH) - 11mm
Code Ref: SL6014

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)3 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master3 x Contessa Picatinny Rail - Sauer 404 (0 MOA)3 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff Brass Front Sight Bead2 x Schmierfix Grease by Liqui Moly1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Gerber Myth Series Fixed Saw1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Stock Removal Wrench1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Krieghoff Comb Wrench (T-Handle)1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x Krieghoff Woven Fabric Patch1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Factory Hanger Pin1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Quick Release Mount for Zeiss Rail1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Gerber GDC Zip Blade1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff Sight Bead Blanking Screw1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x AimZonic Compact Camo Sound Moderator1 x Bear Grylls Ultra Compact Knife1 x Bear Grylls Scout Essentials Kit1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Bauer ED 8x50 Binoculars1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)
Manufacturers
Useful Information