VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)

£8.74
20% VAT incl.


  • Model:331999
VFG Barrel Intensive Cleaning Felts for .22
Code: (66817) 331999


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The Intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing:
80 Intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]3 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Black Barrel Case (83cm Internal)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel Weaver Bases - Heym SR 40 [57080-3041]1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)
Manufacturers
Useful Information