Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor3 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)3 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff HIVIZ Pro Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Front Sight Bead (Small)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trigger Screw1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff 28b Choke Wrench1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x Krieghoff Brass Front Sight Bead1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Krieghoff Shell Bag1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Krieghoff Factory Hanger Pin1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Krieghoff Navy Gun Slip1 x Krieghoff C-Clips (E-Clips)1 x K-80 Stock Weight for Balance System1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff Ejector Ball and Spring1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Krieghoff K80 Speed Wrench for KTW Chokes3 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]4 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sauer 202 (0 MOA)2 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount2 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Recknagel Blank 12mm Eurorail - 150mm3 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]2 x Gerber Powerframe Knife1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II2 x Contessa Spare Ring-to-Base Screws1 x Schultz & Larsen Red Recoil Pad2 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Gerber Paraframe II Fine Edge Knife1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Gerber New Myth Series Pocket Folder1 x Gerber Dime Multi-Tool (Lime)1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Gerber Octane Multi-Tool Red2 x Hi Viz - How to Become a Better Shooter1 x Ex-Display Gerber GDC Zip Hex4 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Gerber Myth Series Fixed Saw3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Anschütz Biathlon Harness2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Schmierfix Grease by Liqui Moly1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]2 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm2 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Winchester 3" Folding Knife1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Jones Gun Nut Kit1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Silva Map Measurer (Mechanical)1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel Weaver Bases - Steyr-Mannlicher (Old Models) [..-3051]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Recknagel Front Sight Bead White [11442-0300]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Jones Original Pad Adjuster1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Steel [..2010]1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Recknagel Picatinny Rail Mauser M12, Alu [..002L]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Silva Dine Duo Kit - Purple/White1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)
Manufacturers
Useful Information