Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Krieghoff Pro Choke Box1 x Recknagel Replacement Polyform Lever [00088-5700]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff HIVIZ Pro Sights1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Anschütz Biathlon Harness1 x Krieghoff 12b Choke Wrench1 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Collectors Badge1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Ejector Ball and Spring1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x LED Lenser Intelligent Filter Set with Holster1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x LED Lenser Car Charger1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x K-80 Stock Weight for Balance System
Manufacturers
Useful Information