Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
4 x Krieghoff Spares Kit3 x Schmierfix Grease by Liqui Moly2 x Krieghoff Ejector Ball and Spring2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Factory Hanger Pin1 x Krieghoff Woven Fabric Patch2 x Krieghoff Front Sight Bead (Small)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x K-80 Barrel Weight Balance System1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x WalkStool Comfort 65 (65cm/26in)1 x K-80 Stock Weight for Balance System1 x Krieghoff Pro Choke Box2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Brass Mid Sight Bead1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount3 x Jones Thru-the-Pad Adjuster1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Teague Precision Choke Key1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x Krieghoff 28b Choke Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)2 x Krieghoff Comb Wrench (T-Handle)2 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Extended Pillars for Adjustable Comb2 x Jones Original Pad Adjuster1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x CR2032 Camelion Lithium Battery1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Navy Gun Slip1 x Krieghoff Brass Front Sight Bead1 x Krieghoff "K" Denim Cap - Navy1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Recknagel Steel Stock Trap Door1 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Trigger Screw1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x ERATAC Picatinny Riser Mount Block (QD)1 x ERATAC Picatinny Riser Mount Block (Nut)1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x ERATAC Ultra Lightweight One Piece Ring Mount1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Silva Map Measurer (Mechanical)1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Silva ex10 Distance Pedometer - White1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)
Manufacturers
Useful Information