Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x MSA Sordin - Hygiene Kit - Foam Seals4 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)3 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)3 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG Magnetic Felt Clamps for Vices - 100mm3 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Navy Gun Slip1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Winchester 3" Folding Knife3 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Krieghoff HIVIZ Pro Sights1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Jones Original Pad Adjuster1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Briley 20b Speed Wrench - For Krieghoff1 x Jones Thru-the-Pad Adjuster1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods Brass1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x ERATAC Bubble Level [T0940-0002]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Jones Gun Nut Kit1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Schultz & Larsen Take Down Rifle Case1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)2 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)3 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x WalkStool Set of Spare Red Spring1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Walkstool Steady1 x WalkStool Spare Leg Joints1 x AimZonic Compact Camo Sound Moderator1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x AimZonic Plus Camo Sound Moderator1 x VFG Complete Set for .1771 x Teague Precision Choke Key1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable4 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Krieghoff Spares Kit1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x K-80 Stock Weight for Balance System1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Pro Choke Box1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Bear Grylls Paracord Fixed Blade1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Woven Fabric Patch1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Brass Front Sight Bead1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG Quick Clean Felts for .22 (Box of 80)2 x VFG Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)3 x VFG Barrel Cleaning Felts for 8mm (Box of 500)2 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Ex-Display Gerber GDC Zip Hex1 x Gerber Powerframe Knife1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Silva Commute Bike Light - Green
Manufacturers
Useful Information