Recknagel Picatinny Rail Sako Short, Alu [..0014]

£130.10
20% VAT incl.


  • Model:57050-0014
Recknagel Picatinny Aluminium Rail for Sako 75/85 Short
Black anodised

Will Fit Sako 75 / 85 / MA05 / I / II / III / MA05 / XS / SM / S
Height of Base - 12.5mm
Code: - 57050-0014

Contents Supplied
- 1x Black Anodised Rail

To mount the rail, separate the rail from the tapered bases. Push the bases onto the Sako receiver and tighten the two vertical locking grub screws to hold in the bases in place. Remount the rail onto the bases.

Dimensions of Adjustments:
The Rail Length is 132mm.
Bases Length: 21mm
Bases Center to Center: Adjustable from 83mm to 121mm
Distance Between Bases: Adjustable from 59mm to 92mm

There is also a picatinny rail designed to fit the Sako 75/85 Medium and Long actions - Recknagel Picatinny Rail 57050-0114.
Always check the measurements on your rifle before ordering.

Please Note that some Sako 75 actions have quite high tolerances and for that reason it is possible that the mount will be tight on the cone. We have to make it this way as a loose mount will not hold zero. Some hand fitting may be required. This is easily done and we can advise on the correct method should you experience this problem. If you are not experienced or competent in this work, please contact us or send it back for a full refund. If you attempt to make alterations to this rail, please be aware that once the mount has been altered, we are unable to provide a refund or accept a return.

For more information about scope mounts and problems mounting a scope, contact Alan Rhone Ltd on 01978 66 00 01.
3 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)3 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x WalkStool Comfort 65 (65cm/26in)2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud3 x Anschütz Biathlon Harness3 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Jones Original Pad Adjuster1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)3 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff HIVIZ Pro Sights2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Pro Choke Box1 x Krieghoff Brass Front Sight Bead3 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x VFG Adaptor from M5 to 1/8" Aluminium1 x K-80 Forward Position Trigger - Titanium1 x K-80 Forward Position Trigger - Steel1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x Gerber Myth Series Fixed Saw1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff C-Clips (E-Clips)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Krieghoff Choke Multi Wrench2 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x K-80 Standard Trigger - Steel1 x Krieghoff Ejector Ball and Spring1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x VFG Barrel Cleaning Felts for .375 (Box of 40)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x K-80 Standard Trigger - Gold Titanium2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff 12b Choke Wrench2 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Zeiss Rail 70º Components - 4mm BH2 x Teague Precision Choke Key1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x WalkStool Spare Leg Joints1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x Gerber Metolius Pocket Folder1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Adaptor for VFG Rods (Spare)1 x EX Demo - Gerber Metolius Pocket Folder1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Winchester 3" Folding Knife1 x Krieghoff Classic "Big Five" Badge1 x Ebony & Brass 20 Bore Snap Caps1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x AimZonic Compact Camo Sound Moderator1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor
Manufacturers
Useful Information