VFG Barrel Cleaning Felts for .22 (Box of 80)

£7.35
20% VAT incl.


  • Model:331881
VFG Barrel Cleaning Felts for .22
Code: (66813) 331881


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing: 80 felt screw-on felts
(Also available: .22 felts - box of 500, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Krieghoff Brass Mid Sight Bead1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Spare Ring-to-Base Screws1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Brass Front Sight Bead1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Krieghoff Spares Kit1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Mount for Swarovski Rail1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Navy Gun Slip1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Trigger Screw1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]
Manufacturers
Useful Information